| T O P I C R E V I E W |
| T00N |
Posted - 25 Feb 2008 : 13:02:29
I try to recreate a shape with the filled polycurve tool.
It works great only I can't figure out how to make a 90 degree (sharp angle with this tool. |
| 6 L A T E S T R E P L I E S (Newest First) |
| s.dav |
Posted - 28 Feb 2008 : 19:45:58
Yes, you can save a piece of the image you want in PNG32 format and import it in the editor ;-) |
| T00N |
Posted - 28 Feb 2008 : 11:19:48
I tried that but the lines created with the polybezier tool just aren't as nice and fluent.
Maybe I should give it another try.
There is no easy way to work around this problem? |
| s.dav |
Posted - 28 Feb 2008 : 10:55:50
In my opinion you have to use the polybezier tool, the polycurve cannot make 90 degrees corners |
| jtarin |
Posted - 28 Feb 2008 : 00:11:10
I see what he is talking about.....he is getting a radius rather than a 90 degree angle. |
| T00N |
Posted - 27 Feb 2008 : 17:36:04
Ok, I 'll try to explain it a little better.
I want to remplicate a very fluent shape, see below:
[img]http://www.madebytoon.nl/dev/shape.JPG[/img]
The tool with which I can make the nicest shapes is the filled curve tool. I can get the rounded lines very well. The problem is when I come to the 90 degree corner. With the filled curve tool I just can't get a sharp 90 degree corner.
See below:
[img]http://www.madebytoon.nl/dev/shape2.png[/img]
Please tell me there is a way to archieve this because this is a very handy tool! |
| s.dav |
Posted - 25 Feb 2008 : 13:38:26
??? |
